Product Page : DHP-W610AV Firmware Version : 1.01EU Hardware Version : A1

DHP-W610AV

setup advanced tools status help

MAC ADDRESS FILTER
ADVANCED WIRELESS
USER LIMIT

Advanced Wireless

These options are for users that wish to change the behaviour of their 802.11n wireless radio from the standard setting. D-link does not recommend changing these settings from factory default. Incorrect settings may impair the performance of wireless radio. The default settings should provide the best wireless radio performance in most enviroments.

Advanced Wireless Settings 2.4G

Wireless Band : 2.4GHz Band

Transmit Power :

WMM Enable :

Short GI :

WLAN Partition :

Ethernet to WLAN Access :

HT20/40 Coexistence : Enable Disable

DTIM :

Rtsthresh :

Fragthresh :

Advanced Wireless Settings 5G

Wireless Band : 5GHz Band

Transmit Power :

WMM Enable :

Short GI :

WLAN Partition :

Ethernet to WLAN Access :

HT20/40 Coexistence : Enable Disable

DTIM :

Rtsthresh :

Fragthresh :

Advanced Wireless Settings

IGMP Snooping :

Helpful Hints...

• It is recommended that you leave these options at their default values. Adjusting them could negatively impact the performance of your wireless network. The options on this page should be changed by advanced users or if you are instructed to by one of our support personnel, as they can negatively affect the performance of your Access Point if configured improperly.

Login

Login to the PLC:

User Name :

Password :

Enter the correct password above and then type the characters you see in the picture below.