Network Settings

Use this section to configure the internal nerwork settings of your AP or wireless stations to assign IP addresses to computers on your network. The IP address that is configured here is the IP address that you use to access the Web-based management interface. If you change the IP address in this section, you may need to adjust your PC's network settings to access the network again.

DEVICE NAME

Device Name :

LAN SETTINGS

Use this section to configure the internal network settings of your AP or wireless stations. The IP address that is configured here is the IP address that you use to access the Web-based management interface. If you change the IP address here, you may need to adjust your PC's network settings to access the network again.

LAN Connection Type :

STATIC IP LAN IPv4 CONNECTION TYPE

Enter the IPv4 address Information.

IPv4 Address :

Subnet Mask :

Gateway Address :

Primary DNS Server :

Secondary DNS Server :

IPv6 Connection Type

Choose the mode to be used by the access point to connect to the IPv6 Internet.

My IPv6 Connection is :

LAN IPv6 ADDRESS SETTINGS

Use the section to configure the internal network settings of your AP or wireless stations. The LAN IPv6 Link-Local Address is the IPv6 Address that you use to access the Web-based management interface.

LAN IPv6 Link-Local Address :

LAN IPv6 ADDRESS SETTINGS

Enter the IPv6 address information provided by your Internet Service Provider (ISP).

IPv6 Address :

Subnet Prefix Length :

Default Gateway :

Primary DNS Server :

Secondary DNS Server :

IPv6 DNS SETTINGS

Obtain DNS server address automatically or enter a specific DNS server address.

Obtain IPv6 DNS Servers automatically

Use the following IPv6 DNS Servers

Primary DNS Server :

Secondary DNS Server :

Helpful Hints...

• LAN Connection - The factory default setting is "DHCP" to allow the IP address of the access point to be manually configured in accordance with the local area network requirements Enable "Dynamic IP (DHCP)" to allow the DHCP host to automatically assign the access point an IP address that conforms to the applisd local area network requirements.

• When configuring the device to access the IPv6 internet, be sure to choose the correct IPv6 Connection Type from the drop down menu.If you are unsure of which option to choose, contact your internet Service Provider(ISP.)

• If you are having trouble accessing the IPv6 internet through the device, double check any settings you have entered on this page and verify them with your ISP if needed.

Enter the correct password above and then type the characters you see in the picture below.

Network Settings

DEVICE NAME

LAN SETTINGS

STATIC IP LAN IPv4 CONNECTION TYPE

IPv6 Connection Type

LAN IPv6 ADDRESS SETTINGS

LAN IPv6 ADDRESS SETTINGS

IPv6 DNS SETTINGS

Login